Visit our USA Site
Visit our Asia Site
Description
Product Description
Forge Motorsport accept no responsibility for damage caused to the vehicle by incorrect installation or setup of this product
As the official and preferred supplier of tuning products to the Mini Challenge, we can now officially release to the public, the Forge adjustable rear tie bars for various Mini models.
After many months of rigorous testing on the F56 model we are now confident we have the perfect solution for a vast range of road going Mini’s.
We started by adding the means of adjustment, and then added strengthening, especially as the development vehicle was used on the track. Then we had polyurethane bushes made by the industries finest Powerflex. If you ignore the obvious benefits of reducing uneven tyre wear and improving the tyre surface contact area, the ability to adjust the geometry allows the fine tuning that helps produce faster lap times and race winners. Compared to the OEM installation, you find that the tram lining feel disappears and the turn in is far crisper.
For fast road use or track enthusiasts this modification is a must. Of course, if you have other modifications on your car this may be the only way to achieve their full potential.
- Manufactured from the highest quality high tensile steel and with EN16T adjusters.
- Supplied with custom made dirt ingress covers.
- Forge Mini tie bars are enhanced with a corrosion resistant powder coating process to ensure the maximum longevity even in the worst environments.
- Fitted with Powerflex polyurethane bushes which use advanced unique technology. These have the ability to offer high performance without vibration or noise but with exceptionally long life and ideally suited to both road and track.
- Manufactured in the UK and covered by our industry leading Lifetime warranty.
My first impression after holding the stock bar was “how did I ever race with this setup?” The stock tie bars as so flimsy it is hard to explain until you hold them and compare them with the Forge rear bars. The stock setup is light, but that isn’t a good thing. These components take a lot of abuse so they need to be strong. The Forge Adjustable Rear Tie Bars were designed for the Mini UK Challenge cars so they are incredibly strong and “beefy”. The rear tie bars are adjustable with a simple rotation and then locked down with two slip nuts. This allows for fine tuning stance and more importantly, camber. These little adjustments will definitely get all the rubber down on the track. As an added bonus, the bars come installed with race (black) bushings from PowerFlex already installed. I drove around for an hour or so and I am pretty amazed how stiff the back of the car feels.
*See terms and conditions, exclusions may apply
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Mini R56 Adjustable Rear Tie Bars
Warranty
Warranty Infomation
The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
Shipping
UK Mainland
Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details
Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary).
Europe and Worldwide
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.
Shipping into the EU - Duty Charge Information
All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU.
If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
FAQ's and other info can be found here.
