Visit our USA Site
Visit our Asia Site
Description
Product Description
- Lower IAT's
- Consistent IAT's
- Maximises airflow
- Perfect fit for FMINDF500
- OEM+ aesthetic
- Lifetime warranty
To assist with the cold air feed to the scuttle on the Abarth 500/595/695 we developed an inlet duct which after testing in the crucible of motorsport, was found to keep a more consistent and lower IAT. With our Abarth induction kit (FMINDF500) also utilising the direct cold air feed to the scuttle panel, we knew that these race proven gains could provide a valuable addition to our ever-popular FMINDF500 Abarth 500/595/695 induction kit.
Race Proven, Daily Driven isn’t just the Forge Motorsport mantra, but it’s also the way we look to develop our products. Our technical partnership with Mini Challenge has allowed us to test our Abarth 500/595/695 components within a highly competitive motorsport series and helps us to highlight areas to develop on other products. The Mini Challenge JCW class use a homologated Forge Motorsport intake, which utilises the cold air feed from the scuttle panel to maximise the density charge of air entering the turbo intake.
FMINLD3 was developed specifically for RHD applications. Whilst it is compatible with the LHD scuttle panel, there is minimal functional benefit when fitted to LHD vehicles, due to a blank located directly beneath the designated mounting area. We are currently exploring the possibility of a template for quick and easy modification to the LHD scuttle, which would allow airflow to be channeled towards the induction inlet more effectively. If proven feasible, this template will be made available retrospectively to LHD owners.
After valuable iterations of design, we settled for a solution that perfectly follows the contours of the scuttle panel to ensure a snug fit to capture as much cold air as possible. 3D-scanning, SolidWorks 3D CAD, and 3D printing gave us the ability to test the differences between width, height and fitment of the inlet duct to finish up with the perfect design to suit FMINDF500. By capturing the washer jet inside the inlet duct it allows for a much wider design to maximise airflow, and helps with installation.
We have spared no expense as per usual with the manufacture of this design, by having billet injection mould tooling created to produce a part with an OEM+ aesthetic. By testing samples against the OEM scuttle panel, we have been able to match the mottled plastic finish so well that you would mistake it for being a factory component! The finishing touch was the gloss finish to the Forge Motorsport logo, making our world-renowned name stand out just enough to really compliment your tastefully modified Abarth.
Complimentary Products
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Product Reviews
Be the first to review this product
Want to leave a review?
Login
Register FREE!
Compatible Vehicles
Instructions
Warranty
Warranty Infomation
The majority of Forge Motorsport products come with a limited lifetime warranty (brakes pads excluded). All warranty claims must be accompanied by the original proof of purchase to enable us to help you. Failure to supply this proof will result in your claim or enquiry being denied.
For further information, please call our customer service team on +44(0)1452 380999 or email info@forgemotorsport.co.uk.
Do not use aggressive (acidic) car cleaning products, particularly traffic film remover solutions or shampoos to clean your intercooler, radiator, or oil cooler. The use of these products can damage Forge Motorsport cooling systems and invalidate your warranty. These are often found at car washes. A light, warm, soapy solution (free of harsh acidic cleaning compounds) should be used to clean you cooler and thoroughly rinsed away. We recommend that you should inspect your product on a regular basis for bent and/or crushed fins. Any bent fins should be carefully straightened to allow ambient air to pass through the core face. At the time of installing your Forge radiator, an approved coolant must be used and added to the coolant system. Be sure you never mix coolant and always use distilled water.
This warranty does not apply to any defect in the goods arising from fair wear and tear, wilful damage, accident, negligence by you or any third party, use otherwise than as recommended by the supplier, failure to follow the supplier’s instructions, or any alteration or repair carried out without the supplier’s approval.
Shipping
Shipping
UK Mainland
Next day delivery applies to orders processed before 12 noon Monday to Friday, subject to stock availability and geographical restrictions. 'Next day' refers to next working day. We cannot guarantee next day delivery for orders placed after this time. Whilst we endeavour to honour our next day service, next day delivery cannot be guaranteed due to other extenuating circumstances. Full details
Delivery is free of charge for all orders £200 (ex VAT) or over. Products are sent by standard DPD service which is usually a next day service, but can take 2 days in transit. We reserve the right to ship smaller, lower value items via Royal Mail or any other service. (Not including Scottish Highlands, Scottish Isles, Northern Ireland, Guernsey, Jersey, and Isle of Man where charges will vary).
Europe and Worldwide
Delivery service charges will vary depending on the quantity of product ordered, the related parcel size, and destination postcode. Live shipping rates will be calculated at checkout using ShippyPro and dependent on criteria, you will be given the option of DHL, DPD, or FedEx courier services.
Shipping into the EU - Duty Charge Information
All Forge products are sold with a Delivery Duty Unpaid (DDU) status and an import tariff may apply to your order. Customers will be contacted by the Customs and Excise authority in the destination country regarding payment prior to delivery, and it is important that correct contact telephone number and email information be submitted with the order to facilitate this part of the delivery process. Some couriers are charging an admin fee for shipping into the EU.
If we detect at checkout that you are located within the European Union (EU), you are eligible for a contribution towards your import duty and tax payments. We can add an additional 20% on the total cost of your order, we will then pay the duty and tax costs above your contribution. This offer will ensure the price you pay at checkout is the total you pay, with no additional charges. It will also ensure you have the fastest possible delivery, with no delays. For more information, please see here
Our shipping methods ensure safe and timely delivery of your new Forge products. For further information on cost and delivery times, please contact Forge using the info@forgemotorsport.co.uk email address if you require any more information. We reserve the right to change the delivery service and company at any time.
Forge Motorsport ships via either UPS, FedEx, DHL (primarily for outside of UK), DPD (primarily for UK), or any other courier we chose. Other shipping options may be available for an additional fee over and above the actual shipping costs. Once a product has left our warehouse and is in the possession of the shipping company, any claims must be made directly with that shipper however we can assist with most cases.
FAQ's and other info can be found here.
