- Description
- Product Reviews
- Compatible Vehicles
- Instructions
- Warranty
- Shipping
Description
Product Description
Designed as a direct replacement for the OEM valve which is prone to failure when the engine has been tuned or had an upgrade to the engine management software. This valve is complete and ready to install with no fitting kit required.
This valve is supplied assembled with our "green" coded spring which is suitable for standard or mildly tuned engines, and also comes with an uprated 'yellow' coded spring.
This valve is suitable for:
- Bentley Continental GT 2003-11
- Ford Focus ST250
- Vauxhall Astra VXR J Type
- Vauxhall Astra 1.6 GTC
- Vauxhall Corsa VXR 1.6 Turbo Z16LER Engine
- Vauxhall/Opel Astra G or H type Z20LET Engine
- Vauxhall Zafira A or B with Z20LET Engine
In The Box:
1 x FMDVK04D Valve
1 x Uprated Yellow Spring
1 x Forge Sticker
If you wish to tune this product to fit the needs of your engine, please see the spring tuning kit below.
We recommend servicing your valve every 3 years, or 20,000 miles, whichever comes sooner
Please note: In certain car models the removal of the O.E mounting bolts may be better facilitated by grinding down the short leg of the appropriate Allen key to 10mm long
Check your vehicle compatibility: Click here
Please Note: In line with our policy to constantly review, revise, and improve our product range, the appearance of the product you receive may differ from the one advertised.
Product Reviews
Compatible Vehicles
Instructions
Warranty
Shipping
Expert Answers
hi, ive currently got my 2009 astra h 1.6t mapped to stage 1. will the spring in this recirc valve be okay for this? thank you
We cannot quote the appropriate spring from a general mapping level references and you will have to determine the running pressure and then select the appropriate spring from the listing seen below.
Green – up to 10psi (supplied off the shelf with this spring installed).
Yellow – 11psi to 16psi (supplied loose with each valve sale).
Blue - 17psi to 22psi.
Red - 23psi to 27 psi.
Also wot does it actually do, will me car go n drive better .
The FMDVK04D is a serviceable, piston sealed valve; and spring tuning options are also available for this valve to cater for customers who need to hold higher than standard boost pressure.
Otherwise, as a like for like replacement, this piston sealed serviceable valve offers peace of mind reliability and smooth turbo spool; second to none on the market in its class.
Hi would this fit a meriva vxr? Reg - DG57ULZ Many thanks
Hello
Yes this product is compatible with your vehicle.
Hi do these fit 2012 Astra j gtc 1.6turbo
Hi Rich, yes it will
Hi will its fit a 2018 Opel Astra j opc
Yes.
Hi will this fit a 2018 focus st 250? And will it be a direct swap thanks
Hi Danny, yes this will fit and it is a direct replacement
Will this fit the A16 engine as well ? reg DX13 VDA
Yes the recirculation valve with product code FMDVK04D fits the 2013 Corsa VXR.
Will this work for the astra k 1.4t ?? If not what one would you recommend??
hello , im sorry we do not do a valve for the astra K
Which spring will I need for a astra h 1.6t running stock
Hi Fraser, thank you for your question.
Running stock you will need the green spring which comes in the valve as standard.
Which orientation is the valve installed in?
There is a machined flat on one edge of the valve which lines up with the discharge for on the valve, both if which must be lined up with the discharge port within the turbo compressor housing.
Will this fit corsa d vxr Nurburgring? Registration is SK63 AWW?
Hello , yes this will fit
I this compatible with Corsa e OPC/VXR 1.6 Turbo (2016)?
Hello,
thank you for your message, yes this will fit your vehicle.
I have a vauxhall astra h gtc with a z16let motor can i buy this for the astra? En how installed on my car
Yes this is compatible with your vehicle and is a direct replacement for your valve.
Hello, which spring kit is suitable for this valve (FMDVK04D) please? Is it possible to have the pressure of each spring (by colour)
The correct spring tuning kit for the valve with part number FMDVK04D is product code FMTVTUN and I have included the spring pressure information below.
Green – up to 10psi (supplied off the shelf with this spring installed).
Yellow – 11psi to 16psi (supplied loose with each valve sale).
Blue - 17psi to 22psi.
Red - 23psi to 27 psi.